High quality 100% European production according to CE EN 13355:2004+A1:2009
5 Standard features
Energy-saving gas-surface burner
Automatic air volume control
User-friendly high-quality digital control
Higher net air power
Patented 19° walls for clean air flow
Painting workshop
Cabin variants - All variants available
Please contact us !
Car paint shop
Transit cabin
NFZ painting system with crane
Car painting cabin with storage room
Preparatory site
Smart Repair
Dimensions indoor LxWxH [m]
Small parts: 3.4 x 2.4 x 2.5 or 5 x 4 x 3
Car: 7x4x3 or in length: 6,6 | 7.7 | 8
Minibus: 9x4.5x3.5 or special dimensions
Unit on the side requires 4 x 2 m of space including maintenance corridor. It can also be set up behind or above the cabin.
Setting up: (picture left to right)
On concrete slab with a 65cm deep on-site pit with steel beams
In the ground sunk 29.5cm deep, substructure 30cm is supplied (also 40cm possible)
With complete ramp 195cm long, substructure 30cm high
Inner ramp, pneumatically movable or immobile
Sketch
Installation options (right pneumatic ramp)
Assembly / construction of a painting booth
Celiber Combined painting and drying systems car / car / car
Mannheim
Mercedes Madrid
Nuremberg
Stuttgart
Nuremberg
Osnabrück
Paris Renault
Stuttgart2
Perfect design
In technology and form
Technology
Energy Saving - Control - Air Performance
Energy saving
Novelty: insulating reflective glasses
60mm thick panels with 150kg/m3 pressed rock wool
Bright LED Lighting
In combination with a paint mixing room
• Components (KWT optional)
• approx. 20% - frequency inverter for 3 air volumes
• approx. 25% - Time and energy - Gas surface burner
• approx. 50% - Aluminum Cross Current HeatExchangeer
(descriptions below)
Control - leaves nothing to be desired
1- Analog
2- Digital / Touchscreen
3- Touchscreen with PLC computer control and remote maintenance
(Control consumption costs)
Frequency controller (automatic) for three speed levels:
Eco
Painting 1 (70-80%)
Painting 2 (full load)
Painting with 12kW power requirement
Switches to save mode when certain time is not painted
Benefits with PLC
PLC = Programmable logic controller (aucn. PLC)
Gentle motor start-up
Intermediate drying as well as any programs
Modulating burner
Safety monitoring of all components
Comparison heating technology
Indirect blower burner
Oil / Gas operated
Indirectly in the heat boiler / heat exchanger
Installed with chimney
Direct gas surface burner
Only with gas (natural gas or liquefied gas, no difference)
Saves approx. 25% heating energy and is fast
Without chimney , approx. 1500 € cost savings
Easiest cost-effective maintenance
With many monitoring compensators extra safe
Aluminum cross-current heat exchanger
Drying is carried out in the circulating air function, but during painting, the heated air is dissipated 100% outwards.
With an integrated cube of aluminium plates between exhaust air supply air, the already heated up-and-away heat for heating the cold supply air with approx. 50% efficiency.
Fans / turbines with enormous air power
32,000 m3 / hr
Reverse curved, easy maintenance and great performance, quiet
0.3 m/sec Air sink speed is mandatory !
No wedge belt with forward curved fans Short life, noisy, difficult maintenance
Wedge belt drive, forward curved
Very tedious maintenance, which is why it is also neglected
Our company mainly deals with new painting systems !
our Engineering companies headquartered in Lörrach, it specialises in the design of painting systems.
We accompany you from the first idea and deliver your standard / individual painting booth.
High quality German and European production According to standards CE EN 13355:2004+A1:2009
Combination painting and drying system
+++ EU Quality + World Quality + German TÜV Quality
+++ All components (motors, electrical components...) German or European goods with service throughout Germany
+ Own service on site with warehouse Take advantage of the convenient opportunity now! Only for a short time...
One of the most outstanding painting systems in the world! Why? --> see special features at the bottom left ..... completely TÜV certified..... Plant 100% according to EC guidelines and standards Guaranteed 100% CELIBER European production with the highest quality components
In the list of recommendations of Mercedes-Benz, Renault, Ford and others
Plant for best results, with high-tech turbines and very high quality equipment water-based paint and other varnishes look at and convince yourself ! Who dares and asks wins!
Space requirement when units on the side: width 600 x height 360 to 420 cm rear: length 860cm
Air outputs with high-performance turbines directly (therefore low energy loss):
Exhaust air 28000m3/h, supply air 28000m3/h NET VALUES !
Full rusting
Ideal air flow through 19° angled walls
10 programs with touchscreen control preset and individual programs for vers. Water-based paints (no cheap touchscreen with 1 program or without pressure control)
High-tech control cabinet
Metal pre-filter, very effective,
no maintenance costs of direct gas surface burners 300kW * (or indirect gas/oil burner)
100% gas output, saves real money and is super fast, without gas odour in the cabin, no extra chimney pipe needed
Must-read: Features of a qualitative painting system Automatic pressure control and monitoring, frequency converter (saving mode)
The quality of the insulation walls is certified!
Stone wool (no cheap mineral wool) escape door, side heat recovery by circulating air
Net price plus Ges. VAT Installation and delivery costs by arrangement. (now also cheap!)
Lackier- und Trocknungsanlagen - schlüsselfertige Lieferung !
Energiesparend mit Rotations-Wärmetauschern
Qualitativ hochwertige deutsche und europäische Produktion, absolut nach Normen CE EN 13355:2004+A1:2009
Perfektes Design
In Technik und Form
Energieeinsparung
Neuheit: isolierende Reflektionsgläser
60mm starke Paneele mit 150kg/m³ gepresster Steinwolle
Helle LED Beleuchtung
In Kombination mit einem Lackmischraum
• Aluminium Kreuzstrom-wärmetauscher
- ca. 50% Heizenergie sparend
• Frequenzumrichter für 3 Luftmengen - ca. 20%
• Gasflächenbrenner - ca. 20% Heizenergie
Ausgereifte neueste Technik
Wir liefern alle Lösungen ! Schlüsselfertig - Lieferzeit ca. 5 Wochen
Steuerung - lässt keine Wünsche offen
1- Analog
2- Digital / Touchscreen
3- Touchscreen mit SPS Computersteuerung und Fernwartung (Kontrolle Verbrauchskosten)
Drei Geschwindigkeitsstufen, Eco, Lackieren 1 und 2 (Volllast) mit Frequenzregler (automatisch)
Lackieren mit 12kW Strombedarf
Schaltet automatisch auf Sparmodus wenn bestimmte Zeit nicht lackiert wird
Sanfter Motoranlauf
Zwischentrocknung sowie beliebige Programme
Modulierender Brenner
Sicherheitsüberwachung aller Komponenten
Indirekter Gebläse-brenner Öl /Gas betrieben
Indirekt im Wärmekessel / Wärmetauscher installiert mit Schornstein
Direkter Gas-flächen-brenner
Spart ca. 25% Heizenergie und ist schnell
Flüssiggas / Erdgas direkte Befeuerung
Ohne Schornstein , ca. 1500 € Kosteneinsparung
Aluminium Kreuzstrom-wärmetauscher
Trocknung erfolgt im Umluftfunktion, aber beim Lackieren wird die erwärmte Luft zu 100% nach außen abgeführt.
Mit einem zwischen Fortluft-Zuluft integriertem Würfel aus Aluminiumplatten kann die bereits beheizte Fortluftwärme zur Erwärmung der kalten Zuluft mit ca. 50% Effizienz genutz werden.
Ventilatoren / Turbinen mit enormer Luftleistung
32.000 m3 / Std
Rückwärtsgekrümmt, einfache Wartung und große Leistung, leise
0,3 m/sek Luftsinkgeschwindigkeit ist geseztlich Pflicht !
Kein Keil-Riemen mit vorwärtsgekrümmte Ventilatoren Kurze Lebensdauer, laut, schwierige Wartung
Keil-Riemen-antrieb, vorwärtsgekrümmt
Sehr mühsame Wartung, deshalb wird es auch vernachlässigt
Beleuchtung
LED-Streifen mit 1000 lux /m²
Wir liefern immer schlüsselfertig !
Auch verlängerte 3J Garantie und Service optional
Projektierung - Herstellung - Verkauf - Zubehör
Unser Unternehmen beschäftigt sich hauptsächlich nur mit neuen Lackieranlagen !
Unser Ingenieur-Unternehmen mit Hauptsitz in Lörrach ist spezialisiert auf die Projektierung von Lackieranlagen.
Wir begleiten Sie ab der ersten Idee und liefern schlüsselfertig Ihre standarde / individuelle Lackierkabine.
Qualitativ hochwertige deutsche und europäische Produktion Nach Normen CE EN 13355:2004+A1:2009